Introduction
Our multi‑section steel poles are designed for fast installation, high structural strength, and long‑term outdoor reliability. They are widely used in: - High Mast Lighting Systems - Telecommunication Towers / Signal Poles - Power Transmission & Distribution Poles - Airport / Port / Stadium Infrastructure
Pre‑Installation Checklist
Tools
- Crane or lifting equipment
- Wrenches / socket tools
- Level meter
- Lifting straps
- Bolts, nuts, washers provided with pole
Safety
- Wear PPE (helmet, gloves, safety boots)
- Ensure foundation is fully cured
- Keep working area clear during lifting
Step‑by‑Step Installation Process
Step 1: Foundation Check
- Confirm anchor bolt layout and verticality.
- Clean all bolt threads.
Step 2: Section Assembly
- Place pole sections on the ground.
- Align the upper section with the lower expansion joint.
- Push/slide sections together until fully seated.
- Tighten internal locking bolts (if applicable).
Step 3: Lifting the Pole
- Fix lifting straps at the marked lifting point.
- Lift slowly to prevent twisting.
- Ground team assists with guiding.
Step 4: Mounting to Anchor Bolts
- Carefully lower the pole onto the bolt template.
- Install washers and nuts.
- Adjust verticality with a level.
- Tighten crosswise to achieve uniform pressure.
Step 5: Top‑Head Installation
Depending on pole type: - High Mast: install head frame, winch system, and luminaire ring. - Telecom: mount antennas, brackets, and cable trays. - Power Pole: fix cross arms, insulators, and cable hardware.
Step 6: Final Inspection
- Verify vertical alignment.
- Confirm all bolts are tightened.
- Check cable routing and safety.
Maintenance (Recommended)
Annual bolt tightening check
Check corrosion or paint damage
Inspect accessories and wiring
"Our high‑strength steel poles are engineered for quick assembly, long‑term reliability, and multi‑industry applications. From high mast lighting to telecom and power distribution, each pole is designed for safe lifting, secure section connections, and outstanding outdoor durability. With a clear installation process and precision‑built components, our pole solutions help customers reduce installation time and ensure stable performance for years to come."